Hey Guys and Gals,
After my recent trip to Japan I picked up a few parts for my PCX.
Will give you a quick run down on parts
WirusWin High Performance Rear Shocks
Daytona front fork springs 20% up
Kijima rear rack
Givi E350ND Rear box
Kitaco grocery hook
Aftermarket grocery hook
GPS/Mobile phone holder
I have installed all except the front fork springs, waterbottle holder and GPS holder. Might get to it next weekend.
The installation of the rear rack and rear suspension requires a few bits of plastic to be taken off, but it is something that can be done yourself if you have the right size sockets/spanners/drill bits etc. Drilling the holes for the rear rack was actually really easy and turned out perfect. Please see the link for more details and photos of parts and the install.
The rear shocks went on easily and are only slightly shorter than stock. They bottomed out badly on the first test ride so after that I wound up the preload and they seem to be ok now. I think I may have even wound them up to hard, so might loosen them off soon. The rebound adjustment seems to make a noticeable difference depending on if it is set to fast or slow. I have lots more testing to do so will keep everyone updated on how it goes. Bumps do seem less sever after the new shocks, however I did expect a bit better. Anyways might just take a bit of tuning. It's only been a few days so far. :)
Any questions post em here and I will try my best to answer them.