Scooter
Community

This will end up being one very cool BWS. Love the new dash.

Nice gauge. Might have to look into that too. Does it need any extra brackets or is it a straight swap?

Thanks REMPIT.

Does he have an internet site as I don't have facebook.

Also there is a guy (american) on youtube from Taiwan,calls himself 'smellybumlove' that sells shyt a lot of stuff for bws 125's including big bore kits up to 280cc's in size and smaller.....Done a lot of reaserch and tuning with them,he has a lots of videos to show it all. 

timmy975:

Nice gauge. Might have to look into that too. Does it need any extra brackets or is it a straight swap?

Thanks REMPIT.

Does he have an internet site as I don't have facebook.

The unit and bracket is a straight swap over. It come with an adapter too to fit our connection. U only need to splice two wires into to make the tacho work and constant power for memory. Easy task, i can run u through it. Ofcourse after ive spent hours learning the hardway LOL.

PMed u the contact email fr RC Scooters. 

hondatodaydemon:

Also there is a guy (american) on youtube from Taiwan,calls himself 'smellybumlove' that sells shyt a lot of stuff for bws 125's including big bore kits up to 280cc's in size and smaller.....Done a lot of reaserch and tuning with them,he has a lots of videos to show it all. 

Yupe seen some of his videos, pretty crazy setup he got going on. But i read in zumaforums he's got some other business going on now and expect delays in him procuring zuma parts thats if he's still doing any. So yeah unless i really need something that only he has, would probably stick with ppl ive dealt with before. 

If anyone needs to know how i go with dealing with any sellers let me know!

hmmm sure has been awhile since the last time around. got some new development..

Installed a set of GJMS GP3 adjustable rear shocks, KOSO floor plates, YAMAHA skid plate and threw on a new red BWSX cover.

and ofcourse had to make the best of the good weather while it still last..

Ok, today I installed it.
Hey, put such a device itself!







And, so, it looks great!

But, unfortunately, did not connect the tachometer: (

Tell me how you did it?

Your BWS looks awesome. You should be very happy with how it looks. Some really nice mods

Hi dimanbratan

You need to connect the tacho wire from the gauge to the Orange wire coming out of the ECU unit.This orange wire goes down to the spark plug coil. good luck.

Hi Balse,

Ok, I'll try, thanks for your help!

HI Balse!
Today I connected Tahometer, it works!





But, for me, there was a problem with the fuel sensor connection.



I have a fuel gauge with three wires to connect it to BWS X Gauge left me with two wires, green and white :)



Maybe somebody knows how to hook up, the fuel gauge?

Hi dimanbratan

It seems your gauge is the same as mine with 3 different wiring plugs. I had to sort out the wiring and in the end I cut the 3 plugs off the old gauge leaving  about 75mm of wire on them then cut the 3 plugs off the new gauge at the plugs & through them in the bin.                                                     I then joined up the old gauge plugs and wires to the new gauge wiring. It turned out easier than I thought as it was colour to colour keeping in mind there are 3 shades of green (light,medium,dark) and 2 shades of brown (light,dark). To make everything work all the wires need to be connected.     The new gauge as far as the plugs are concerned uses 1 less wire, the plug with the white wire and the black/blue wire you only have to connect the white wire and just forget the other wire as its not needed with the new gauge. If you need more help get back to me I can maybe take some photo's of mine which may help.

Droooooool....

http://japan.webike.net/ps/bws+125+advancepro/#!search&p.rows=100&p.ref=product-search&p.k=bws%20125%20advancepro