Taking a battery-ing

Last post 09-17-2019 12:04 PM by aspro boy. 1 replies.
Page 1 of 1 (2 items)
Sort Posts: Previous Next
  • 09-05-2019 08:04 PM

    Taking a battery-ing

    After many, many years and many, many bikes (mostly new) I finally had to experience a battery failure.

    I guess that there is no way to protect oneself from a sudden, complete failure, but the good news is that

    Brenton at Yamaha World came to the rescue.

    PS    The battery was only 3 months old.




  • 09-17-2019 12:04 PM In reply to

    Re: Taking a battery-ing

    Talking batteries I purchased a ctek 0.8amp 6 step charger for both the Tricity 155 and Monkey 125. I acquired an additional battery connector saddle so that the charging can be swapped between bikes, as required, without removing their batteries. But I'm wondering If it would be preferable to remove the batteries whilst chargeing? Also, the battery type stated for the Tricity is a VRLA, that requires a constant voltage charger (ref: manual), so I'm wondering if the 6 step ctex 0.8amp charger is suitable? Any thoughts? 

Page 1 of 1 (2 items)